Best Compressor To Run 2 Framing Nailers At The Same Time

When it comes to running two framing nailers at the same time, finding the right compressor can be a challenge. Many assume that any compressor can handle two framing nailers, but that is not always the case. The size and power of the compressor, the amount of airflow required, and the type of nailers being used all play a role in the selection process.

In this blog post, we will discuss the best compressor to run two framing nailers at the same time. We will cover the important features to look for when purchasing a compressor and what you should consider before making a purchase. We will also provide several recommendations for the best compressors on the market so that you can make an informed decision.

With the right compressor, you can make sure that your framing nailers are running efficiently and safely, so you can get the job done right. So, if you are looking for the best compressor to run two framing nailers at the same time, then you’ve come to the right place. Keep reading to discover which compressors we recommend.

What Size Air Compressor Do I Need To Run Two Framing Nailers Simultaneously?

When selecting an air compressor to run a framing nailer, it is important to consider the size of the compressor tank, the horsepower rating, and the amount of cubic feet per minute (CFM) the machine can produce.

First, let’s see the recommended size of the air compressor to run a framing nailer successfully. To run a framing nailer we need the following specification air compressor.

1. Tank size: 2 to 6 gallons tank size should be sufficient to meet a single nailer air requirement. When you think to run two or more air nailers, you should consider a bigger tank size like 10 gallons or more.

2. Motor Power: The horsepower rating is also important in choosing an air compressor size, as it indicates the amount of air pressure the compressor can generate. A minimum of 2 horsepower is recommended to run a single framing nailer to generate 150 PSI pressure.

3. CFM Rating: Finally, the CFM rating should be able to keep up with the air demands of the nailer; most framing nailers require 2.2 CFM, so a compressor that can produce at least 4 CFM @ 90 PSI (1.5 times) should be chosen.

Now, we should select an air compressor that is twice as large as the one described previously if we wish to use two pneumatic framing nailers simultaneously. Therefore, an air compressor with a tank capacity of 10 to 20 gallons and the ability to produce at least 6-7 CFM @ 90 PSI is appropriate for running two framing nailers concurrently.

You can choose the right size air compressor to run your framing nailer if you read it carefully.

Factors To Consider When Choosing A Compressor

When it comes to running two framing nailers at the same time, having the right compressor is essential. A good compressor should be able to provide enough air flow, pressure, and tank size to keep up with the demands of two framing nailers.

Let’s find the essential factors to consider when choosing the best air compressor to run two framing nailers at a time.

1. Air Flow Rate (CFM):

The cubic feet per minute (CFM) rating indicates how much air the compressor can produce. For running two framing nailers, you’ll want a compressor with a high CFM rating. Look for a compressor with a CFM rating of at least 7.0 to run two framing nailers together.

2. Tank Size:

The size of the compressor’s tank will affect how long you can run the framing nailers before the compressor needs to recharge. A larger tank will allow for more extended use before needing to recharge. Look for a compressor with a tank size of at least 10 gallons.

3. PSI:

The pressure per square inch (PSI) rating indicates how much pressure the compressor can produce. For framing nailers, you’ll want a compressor with a PSI rating of at least 150.

4. Portability:

Consider how often you’ll need to move the compressor. If you’ll be using it on different job sites, look for a compressor with wheels and a handle for easy transport.

5. Noise level:

Some compressors can be quite loud, especially when running at full capacity. Look for a compressor with a low decibel (dB) rating if you’re concerned about noise.

6. Electric vs. Gas Powered:

Electric compressors are more convenient and easier to use, but gas-powered compressors are more portable and can be used in remote locations.

7. Nailing Speed:

When choosing the appropriate size air compressor, speed of completion is a factor as well. A larger compressor will enable you to nail things more quickly. So, if you’re a professional framer, you should invest in a large wheelbarrow air compressor or a stationary air compressor that can power several tools at once.

Top Compressors For Running 2 Framing Nailers Simultaneously

Based on the aforementioned parameters, we determined that the following three air compressors are the best for running two or more framing nailers simultaneously, and you can choose one of them for your upcoming job.

1. Makita MAC5200 3.0 HP Big Bore Air Compressor:

The Makita MAC5200 is a high-performance air compressor that is designed for professional use. It has a big cylinder and piston for more air output, and the strong 3.0 horsepower engine is powerful enough to power two framing nailers simultaneously. With its 5.2-gallon tank, which generates less noise, and 140 PSI, you can easily drive nails into any type of board.

Specifications:

• 3.0 horsepower motor
• 6.5 CFM @ 90 PSI
• Big bore cylinder and piston for increased air output
• Low noise level of 65 dB
• Oil-lubricated pump for increased durability

Pros:

• High-performance motor and pump for increased air output
• You will get increased heat dissipation and low water in the tank thanks to copper-finned discharge tubing
• Durable wheels for transportation on the job site
• Low noise level
• Durable oil-lubricated pump
• Makita is a USA company
• Offer one year warranty for parts and labor

Cons:

• The price may be higher than other compressors
• Heavyweight, which may make it difficult to transport

If you’re interested, you can look at the prices of the Makita MAC5200 3.0 HP Big Bore Air Compressor on Amazon or Acme Tools.

2. Metabo HPT 6-Gallon Pancake Air Compressor:

I found the Metabo HPT 6-gallon pancake air compressor is an extremely compact and portable compressor that is suitable for a variety of tasks. It features a powerful 1.5-horsepower motor and a 6-gallon tank for increased capacity.

Although it appears to be an insufficient compressor based on the tank size and motor power to power two framing nailers, it can generate 200 PSI of air pressure, which is the highest in its class and sufficient to power two framing nailers, two roofing nailers, two siding nailers, three finish nailers, or five brad nailers at once.

Specifications:

• 1.5 horsepower motor
• 6-gallon tank
• 4 CFM @ 90 PSI
• Oil-free pump for easy maintenance
• Compact and portable design
• Low noise level of 78 dB

Pros:

• Compact and portable design for easy transport
• Consistently drives nails flush without any delay
• Low noise level
• Oil-free pump for easy maintenance
• Affordable price
• Offer a one-year professional warranty for peace of mind

Cons:

• A lower horsepower motor may not be suitable for high-demand tasks
• The 6-gallon tank may not provide enough capacity for extended use

If you’re interested, you can look at the prices of the Metabo HPT 6-Gallon Pancake Air Compressor on Amazon or Acme Tools.

3. DeWalt DXCMLA1983012 30-Gallon Portable Air Compressor:

The DeWalt DXCMLA1983012 30-gallon portable air compressor is a powerful and durable compressor that is designed for professional use. It features a high-performance 5.0 horsepower motor and a large 30-gallon tank for increased capacity.

This high-capacity portable air compressor will be the best option if you need to manage a large project and are in a rush to finish your work on schedule. It has a 6 CFM @ 90 PSI output, which is ideal for running several high-consumption air tools simultaneously.

Specifications:

• 5.0 horsepower induction motor
• 30-gallon tank
• 6 CFM @ 90 PSI
• 155 PSI max air pressure
• Dual cooling system for quick cooling
• Portable design with wheels and handle
• Low noise level of 80 dB

Pros:

• The high-performance induction motor and a large tank for increased capacity and long-lasting performance
• Durable cast iron pump
• Portable design with wheels and handle for easy transport
• Required minimum or no maintenance for oil-free design
• Low noise level
• Comes with a fully assembled and one-year limited warranty

Cons:

• Higher price compared to other compressors
• Heavyweight, may be difficult to transport without help.

If you’re interested, you can look at the prices of the DeWalt DXCMLA1983012 30-Gallon Portable Air Compressor on Amazon or Acme Tools.

How To Set Up And Use A Compressor For Framing Nailers

Using a compressor to power your framing nailer can make your work more efficient and save you time and energy. However, it’s important to set up and use the compressor properly to ensure safety and optimal performance.

Safety Precautions

• Always wear appropriate personal protective equipment (PPE) when working with a compressor, including safety goggles, ear protection, and a dust mask.
• Make sure to read the manufacturer’s instructions and safety guidelines before using the compressor.
• Never leave the compressor running unattended, and always turn it off when not in use.
• Keep the compressor in a well-ventilated area to prevent a build-up of harmful gases.

How To Properly Connect The Framing Nailer To The Compressor

• First, make sure that the compressor is turned off and unplugged.
• Connect the framing nailer’s air hose to the compressor’s air outlet using the appropriate fittings.
• Turn on the compressor and adjust the pressure to the recommended setting for the framing nailer (usually between 70-120 PSI).
• Test the framing nailer to make sure it’s working properly.

How To Adjust The Compressor Settings For Optimal Performance

• Adjust the pressure to match the recommended PSI for the framing nailer.
• Make sure that the compressor’s air flow rate (CFM) is high enough to keep up with the demands of the framing nailer.
• Check the compressor’s tank size to ensure that it’s large enough to provide enough air for the framing nailer without needing to recharge too frequently.
• Adjust the compressor’s regulator to match the framing nailer’s requirements.

How To Maintain And Troubleshoot Common Issues

• Regularly check the compressor’s oil level and change the oil as needed.
• Clean the compressor’s filter and air intake regularly to remove dust and debris.
• Check the compressor’s hoses and fittings for leaks and wear and replace them as needed.
• If the compressor is not producing enough air, check the compressor’s PSI and CFM settings, as well as the air intake and filter for blockages.
• If the framing nailer is not working properly, check the air hose and fittings for leaks and make sure that the pressure is set correctly.

Using a compressor to power your framing nailer can make your work more efficient and save you time and energy. However, it’s important to set up and use the compressor properly to ensure safety and optimal performance.

By following the safety precautions, properly connecting the framing nailer to the compressor, adjusting the compressor settings for optimal performance, and troubleshooting common issues, you can ensure that your compressor is working at its best.

Conclusion

In conclusion, when choosing a compressor to run two framing nailers at the same time, it’s important to consider factors such as air flow rate, tank size, PSI, portability, noise level, and electric vs. gas-powered.

Based on the above, I found the Makita MAC5200 Big Bore 3.0 HP Air Compressor is ideal for a DIY framer who wants to run a framing nailer and another finish nail gun simultaneously. However, if you planning to run a workshop or a big framing project that needs to run a wide range of air tools including a sander, painting machine, and heavy-duty framing nailer, the Dewalt DXCMLA 30-gallon air compressor will be the best option for you.

Although it can be difficult to locate the best compressor to run two framing nailers at once, with the correct compressor you will be able to accomplish the task fast and effectively.