How To Load A Bostitch 18 Gauge Nail Gun In 3 Easy Steps

The Bostitch 18 gauge brad nailer is a very useful tool for any amateur or expert woodworker to complete medium-duty woodwork. Therefore, having a tool like this in your toolbox is essential. However, if you’re wondering how to load a Bostitch 18 gauge nail gun, don’t be! In this blog post, we’ll step-by-step demonstrate how to load and unload a Bostitch 18 gauge brad nailer quickly and easily so that you can start working on your next project right away. We’ll also go over a few more crucial technical details so you won’t run into any problems while using this equipment to drive nails.

Jump To The Right Section Show

What Is The Bostitch 18 Gauge Brad Nail Gun?

The Bostitch 18 Gauge Brad Nail Gun is a top-of-the-line nail gun that can be used for a range of tasks such as attaching trim molding, creating little pet shelters, and DIY ornamental woodwork. It is often constructed with a sturdy aluminum body and a precise nosepiece, making it ideal for usage in both professional and domestic settings. This nail gun is one of the greatest alternatives to a manual hammer since it has a depth of drive adjusting feature and a tool-free jam release. It is ideal for a range of applications because it can shoot nails up to 2-1/8 inches long.

What Are The Uses Of A Bostitch 18 Gauge Nail Gun?

The Bostitch 18 Gauge Brad Nail Gun is an effective instrument with a wide range of uses. It is ideal for finishing tasks since decorative trim or molding may be added with ease. Additionally, it can be used to join small pieces of wood collectively when creating shelving or cabinets. You can also use it for medium-duty professional tasks like paneling, fixing baseboards or door frames, and upholstery. Considering that it can be used to hang pictures, add trim, and much more, this tool is also excellent for do-it-yourself jobs around the house.

How Does A Bostitch 18 Gauge Brad Nailer Work?

A Bostitch 18 gauge brad nailer BTFP12233 is a type of pneumatic nailer that uses compressed air to drive nails into wood or other materials. The air compressor supplies air to the nailer, which is used to drive the nails into the material. The nailer has a magazine that holds the nails, and a trigger that is used to release the compressed air and drive the nail into the material.

Read Also: How To Load A Bostitch Nail Gun?

How To Load A Bostitch 18 Gauge Nail Gun – 3 Easy Steps

It’s not difficult to load a Bostitch 18 gauge nail gun. You could quickly learn them after going through the steps below.

The procedure for loading a nail gun is as follows:

Step 1 Open The Magazine

Depress the magazine release button on the side of the gun and pull back the magazine.

Step 2 Insert The Brads

Tilt the nail gun so the discharge area is facing away from you and any nearby people, and completely extend the magazine. Insert brads into the magazine channel with the pointed end facing down.

Keep in mind to insert the nail heads into the correct channel slots based on their height. There are multiple slots for nails of various sizes.

Inserting brads in the magazine's channel

Step 3 Close The Magazine

Push the magazine forward until the latch lock in place.

Finally, pull the trigger and hold the gun in the “cocked” position to cock it. Push the safety lever all the way to the “fire” position to release the safety. Squeeze the trigger to fire the gun after aiming it at the intended target.

Your nail gun is now loaded and ready to use.

Cautions:

When loading the Bostitch brad nail gun:

Always unplug the air hose from the equipment;
Always put on safety gear, such as goggles for your eyes;
Avoid sticking your fingers or any other body part into the tool’s fastener discharge area;
Never direct the instrument toward somebody;
Avoid pulling the trigger or depressing the trip since either action could accidentally trigger, potentially injuring someone.

How Can I Change The Trip Mode In A Bostitch Brad Nailer?

In order to change the actuation mode in a Bostitch 18 gauge nail gun, simply press the mode selector switch located on the top of the gun. This will allow you to choose between sequential and contact nailing.

Turn the switch toward the body of the nail gun where the three nail icon is stamped to choose contact trip mode. In contrast, turn the switch toward the single nail icon to enter sequential trip mode. When the indicating switch is pointing at an icon, the mode switch will automatically lock.

How To Unjam A Bostitch 18 Gauge Nail Gun?

If your Bostitch 18 gauge nail gun is jammed, there are a few things you can do to try and unjam it.

First, make sure that the magazine is properly loaded with nails. If it is, then check to see if there is anything blocking the pathway of the nails. Sometimes a nail can get bent and get stuck, so try removing any bent nails.

To clear the jammed nail, open the jam-clearing nose door by pulling down and then up on the latch. If needed, you may use pliers to remove the jammed nail.

Next, clear the air passage by removing any debris that may be blocking it.

Finally, oil the gun to help keep it running smoothly.

If all else fails, you can contact Bostitch customer service for further assistance.

Read Also: How to unjam a nail gun Quickly?

How To Oil The Bostitch Brad Nailer?

Bostitch brad nailer is usually an oil-free tool. However, if your model is need to put oil it is a simple process. To put oil in a Bostitch brad nailer, first, remove the magazine and disconnect the air supply. Then, find the air input port on the nailer’s side where the air hose connects, and place the oiling needle there. Apply a few drops of oil, then put the nailer back together. That’s how easy it is.

Takeaways

In conclusion, loading a Bostitch 18-gauge nail gun is a rather simple process. You can rapidly set it up for your next project after you learn the basics. It is a handy tool that may be applied to a wide range of domestic and professional duties.

Related Post:

Rate this post